You have 0 items in your cart.
By Brands
Brands
Sub Categories
Category:
Options
The set consists of two adapters One red (signal) and one black (ground) 4-mm banana contact Maximum Signal Voltage: 600V rms Maximum Voltage to Ground: 600V rms. CAT III per IEC 61010-031
Category:
Options
Dual Banana Plug 4 mm male to female BNC Adapter Consists of two adapters Maximum Signal Voltage: 300V rms Maximum Voltage to Ground: 600V rms CAT III per IEC 61010-031
Category:
Options
Fabric holster absorbs shocks and protects meter from rough handling Built-in pocket for lead storage Convenient belt-loop with snap One year warranty
Category:
Options
Maximum Signal Voltage: 300V rms CAT III per IEC 1010-02-031 Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031
Category:
Pressure
Compatible with the 717 and 718 calibrators 100 PSI and below The kit contains: three translucent hoses one meter long easy to connect push fit connectors for both connect ion to the calibrator and the device under test one 1/8 to ¼ NPT female-female adapter.
Category:
Pressure
Pump can be easily cleaned without disassembly The vernier can be used as a stand-alone low pressure calibration source Two pressure ports allowing simultaneous connection ¼ -NPT female fitting for the reference gauge or pressure module ¼” NPT female fitting for the unit under test Adjustable stroke length can be set to limit the pressure per stroke Includes 1/4 in NPT male to 1/4 in BSP female 1 meter of hose (2) 1/8 in NPT male quick connects 1/8 NPT female to 1/4 in BSP female Seal Kit Instruction sheet
Category:
Pressure
Adjustable from 725 to 5800 PSI (50 to 200 bar) Preset at 2,900 psi/200 bar) Repeatability to 10% of nominal setting. Installs directly into the 700HTP-1 pump
Category:
Pressure
Pump can be easily cleaned without disassembly. Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test Slim design, easy to carry and use Includes: (2) adapters to convert the reference and UUT port hose fitting to 1/4" BSP female Adapter to convert the reference port hose fitting to 1/4" NPT female for connection to 700 series pressure modules One seal kit Instruction sheet in English
