You have 0 items in your cart.
By Brands
Brands
Sub Categories
Category:
Lights for Probes and Hats
Cap adjusts for all-day comfort Light attaches to bill of baseball cap Rugged light withstands 6' drops to concrete Waterproof light case won't crack or chip Electrically and thermally nonconductive
Category:
Lights for Probes and Hats
3 super bright white LEDs 360° Rotating clip Special hard-hat attachment included 40-hour battery life Water resistant Durable polymer construction Rubber shielded Bezel Also includes a neck lanyard Hats not included with Deluxe LED Hat Light L206
Category:
Lights for Probes and Hats
Attaches to a baseball hat - includes hat clip Electrically and thermally nonconductive Withstands 6' drops to concrete Waterproof Rugged ABS case won't crack or chip Bright xenon lamp in a prefocused optical quality reflector
Category:
Lights for Probes and Hats
Small, rugged light easily attaches to any Fluke test probe Bright white LED illuminates contact area Frees both hands for work 120 hours of battery life Uses 2 3-volt watch batteries
Category:
Infrared (IR) Windows
No more removing the panel door for installation Work permit requirements and NFPA 70E processes are significantly reduced Full PPE is often not required so inspections are done faster and more comfortable Superior arc blast protection: High temperature silicon gaskets Mounting and door latches provide high pressure gasket compression Die cast components are manufactured with the highest strength alloys Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile Torture Tested to the highest test ratings IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE Quick and easy installation Installation takes 5 minutes with one technician Only one hole necessary with standard Greenlee punch. Rear access required for punch connection only (Easily accomplished with one technician) Installs from front; no template needed; no rear access required Grounds instantly to metal enclosure with patent pending AutoGround process Sharp teeth on jam nuts assure four gas-tight ground connections All components have electrically conductive finishes for optimum...
Category:
Infrared (IR) Windows
No more removing the panel door for installation Work permit requirements and NFPA 70E processes are significantly reduced Full PPE is often not required so inspections are done faster and more comfortable Superior arc blast protection: High temperature silicon gaskets Mounting and door latches provide high pressure gasket compression Die cast components are manufactured with the highest strength alloys Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile Torture Tested to the highest test ratings IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE Quick and easy installation Installation takes 5 minutes with one technician Only one hole necessary with standard Greenlee punch. Rear access required for punch connection only (Easily accomplished with one technician) Installs from front; no template needed; no rear access required Grounds instantly to metal enclosure with patent pending AutoGround process Sharp teeth on jam nuts assure four gas-tight ground connections All components have electrically conductive finishes for optimum...
Category:
Infrared (IR) Windows
No more removing the panel door for installation Work permit requirements and NFPA 70E processes are significantly reduced Full PPE is often not required so inspections are done faster and more comfortable Superior arc blast protection: High temperature silicon gaskets Mounting and door latches provide high pressure gasket compression Die cast components are manufactured with the highest strength alloys Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile Torture Tested to the highest test ratings IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE Quick and easy installation Installation takes 5 minutes with one technician Only one hole necessary with standard Greenlee punch. Rear access required for punch connection only (Easily accomplished with one technician) Installs from front; no template needed; no rear access required Grounds instantly to metal enclosure with patent pending AutoGround process Sharp teeth on jam nuts assure four gas-tight ground connections All components have electrically conductive finishes for optimum...
Category:
Infrared (IR) Windows
No more removing the panel door for installation Work permit requirements and NFPA 70E processes are significantly reduced Full PPE is often not required so inspections are done faster and more comfortable Superior arc blast protection: High temperature silicon gaskets Mounting and door latches provide high pressure gasket compression Die cast components are manufactured with the highest strength alloys Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile Torture Tested to the highest test ratings IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE Quick and easy installation Installation takes 5 minutes with one technician Only one hole necessary with standard Greenlee punch. Rear access required for punch connection only (Easily accomplished with one technician) Installs from front; no template needed; no rear access required Grounds instantly to metal enclosure with patent pending AutoGround process Sharp teeth on jam nuts assure four gas-tight ground connections All components have electrically conductive finishes for optimum...
